• The Gear Page Apparel & Merch Shop is Open!

    Based on member demand, The Gear Page is pleased to announce that our Apparel Merch Shop is now open. The shop’s link is in the blue Navigation bar (on the right side), “Shop,” with t-shirts, hats, neck buffs, and stickers to start. Here’s the direct link: www.thegearpageshop.com

    You’ll find exclusive high-quality apparel and merchandise; all items are ethical, sustainably produced, and we will be continuously sourcing and adding new choices. 

    We can ship internationally. All shipping is at cost.


Fuchs ODS hand tuning at home

sam30328

Member
Messages
158
Someone started a thread some time ago about tuning a Fuchs ODS via the three screws located in front of the chassis---can't seem to find that thread. The gist of it was that 2 screws had little effect,but the third had a noticeable improvement in the od channel.Anyone remember that thread?
Thanks for any input.

Sam
 

gitman

Member
Messages
995
the trimpots are located inside the amp, mounted on the main board. get in touch with Andy Fuchs and he can tell you what each pot does and what to expect. it's also explained in the original manual.
 

PierreL

Silver Supporting Member
Messages
2,900
All Fuchs ODS are not the same, the internal trimmers might have different effects from one to another. Mine has a trimmer for Highs, one for Lows, and one for OD. You'll need to get the chassis out of the head to tweak them. The OD one is quite sensitive, so be careful as you change your tone considerably with what seems a small change.
 




Trending Topics

Top