Fulltone TTE and Echoplex Switchers @ Loop-Master.com!

Discussion in 'Builder's & Retailer's Forum' started by Loop-Master, May 4, 2012.


  1. Loop-Master

    Loop-Master Member

    Messages:
    3,403
    Joined:
    Jan 21, 2005
    Footswitch for the Fulltone Tube Tape Echo

    http://www.loop-master.com/product_info.php?cPath=34&products_id=170
    • [​IMG]
    **PLEASE NOTE: THIS FOOTSWITCH WILL ONLY WORK ON FULLTONE TUBE TAPE ECHOES WITH SERIAL NUMBERS THAT ARE 3479 AND LOWER**

    Footswitch for the Fulltone Tube Tape Echo (TTE). Controls "Playback" and "On'Off" functions.

    DIMENSIONS: 3.63" X 1.5" X 1.06"



    Echoplex Footswitch

    http://www.loop-master.com/product_info.php?cPath=34&products_id=169


    • [​IMG]
    Get full control over all functions of your EP-2, EP-3 or EP-4 Echoplex tape echoes with one pedal. (*Not for use with the Gibson/Oberhiem Digital Pro models etc..**)
    Select "Bypass"to completely remove the Echoplex from your signal chain.
    Echo On/Off lets you turn the echo off but still take advantage of the Echoplex's great buffer.
    Recording/Playback lets you playback something you recorded on the fly.
    All functions do not have to be hooked up. For example, if you just wanted to use it as a bypass box for the Echoplex, just use the loop part of the switcher. (In, Out, Send, Receive) Or if you only wanted to control the Sound On Sound (Playback) and/or Echo On/Off etc.. just connect those sections up only. Unit will work without power minus LED indication.
    Can also be used as a stand-alone single loop effect switcher for any effect that you want to bypass.
    Dimensions: 4.7" X 3.7" X 1.1" box enclosure.
    Built with Switchcraft jacks, heavy-duty switches, military spec. wire, and silver soldering throughout.
    LEDS: For the 9V DC Jack, these units require a 9V AC adapter with a Boss/Ibanez style 2.1mm barrel plug. If you do not have one, we have these in the "Accessories" section. (The LED circuit in any Loop-Master™ pedal does not affect tone.) All leds: Blue
     
    Last edited: Jun 21, 2016
  2. GMinNJ

    GMinNJ Member

    Messages:
    14
    Joined:
    Apr 14, 2010
    Question:

    Could you make an echoplex footswitch that also had A/B/Y capabilities?

    My echoplex is last in my chain, and I'd like to put my signal through two amps (either at same time or not), and having that function in your box would be great...
     
  3. Loop-Master

    Loop-Master Member

    Messages:
    3,403
    Joined:
    Jan 21, 2005
    Yep. Email me at loopmasterpedals@gmail.com about this if interested
     
  4. DGTCrazy

    DGTCrazy Moderator de Emporio Staff Member

    Messages:
    15,272
    Joined:
    Aug 13, 2010
    Location:
    Petaluma, CA
  5. Loop-Master

    Loop-Master Member

    Messages:
    3,403
    Joined:
    Jan 21, 2005
    Thanks for the business!
     
  6. dmczern

    dmczern Member

    Messages:
    1,770
    Joined:
    May 22, 2006
    Location:
    Fort Collins, CO
    Hey there!! Any chance that you make one for a Roland Space Echo? RE 201? Thanks!
     
  7. Loop-Master

    Loop-Master Member

    Messages:
    3,403
    Joined:
    Jan 21, 2005

    Email me at loopmasterpedals@gmail.com about this and I will look into it.
     
  8. Terry McInturff

    Terry McInturff 40th Anniversary of guitar building! Gold Supporting Member

    Messages:
    4,226
    Joined:
    Nov 4, 2003
    Location:
    Pittsboro NC
    Just want to say that I do enjoy my 5 loop pedal from you. Thanks!
     
  9. Loop-Master

    Loop-Master Member

    Messages:
    3,403
    Joined:
    Jan 21, 2005
    Thanks!
     
  10. Loop-Master

    Loop-Master Member

    Messages:
    3,403
    Joined:
    Jan 21, 2005

Share This Page