• The Gear Page Apparel & Merch Shop is Open!

    Based on member demand, The Gear Page is pleased to announce that our Apparel Merch Shop is now open. The shop’s link is in the blue Navigation bar (on the right side), “Shop,” with t-shirts, hats, neck buffs, and stickers to start. Here’s the direct link: www.thegearpageshop.com

    You’ll find exclusive high-quality apparel and merchandise; all items are ethical, sustainably produced, and we will be continuously sourcing and adding new choices. 

    We can ship internationally. All shipping is at cost.


Fulltone TTE & Echoplex Controllers @ Loop-Master.com

Loop-Master

Member
Messages
3,518
http://www.loop-master.com/product_info.php?cPath=34&products_id=169

Echoplex Footswitch:






Get full control over all functions of your EP-2, EP-3 or EP-4 Echoplex tape echoes with one pedal. (*Not for use with the Gibson/Oberhiem Digital Pro models etc..**)

Select "Bypass"to completely remove the Echoplex from your signal chain.

Echo On/Off lets you turn the echo off but still take advantage of the Echoplex's great buffer.
Recording/Playback lets you playback something you recorded on the fly.
All functions do not have to be hooked up. For example, if you just wanted to use it as a bypass box for the Echoplex, just use the loop part of the switcher. (In, Out, Send, Receive) Or if you only wanted to control the Sound On Sound (Playback) and/or Echo On/Off etc.. just connect those sections up only. Unit will work without power minus LED indication.

Can also be used as a stand-alone single loop effect switcher for any effect that you want to bypass.

Dimensions: 4.7" X 3.7" X 1.1" box enclosure.

Built with Switchcraft jacks, heavy-duty switches, military spec. wire, and silver soldering throughout.

LEDS: For the 9V DC Jack, these units require a 9V AC adapter with a Boss/Ibanez style 2.1mm barrel plug. If you do not have one, we have these in the "Accessories" section. (The LED circuit in any Loop-Master™ pedal does not affect tone.)

All leds: Blue





http://www.loop-master.com/product_info.php?cPath=34&products_id=170



Footswitch for the Fulltone Tube Tape Echo:





Footswitch for the Fulltone Tube Tape Echo (TTE). Controls "Playback" and "On'Off" functions.


Dimensions: 4.37" X 2.37" X 1.22"

Comes with blue leds

**You must use a stereo (TRS) cable for this pedal to hook to the TTE. The TTE manual calls for the use of the highest quality stereo cable you can find to reduce signal loss. We have access to these cables if you need one. Email us with your required length and I will get you a quote.

Also, if you have little or no use for the "Playback" feature, you can use a standard guitar cable into the TTE and this switcher. Or, just use one of our standard Channel/Effects Switchers into the TTE with a standard guitar cable if you aren't ever going to use the "Playback" feature on the TTE.
 

chuk

Member
Messages
37
Hi, are you no longer rewinding echoplex cartridges?
I went to this site many times over the years for education an inspiration to tech my tape delays.

http://www.regiscoyne.com/echoplex/

At the bottom are some suggestions for parts, etc.... I ended up buying tape from JOA and rewinding tapes myself with a little homemade jig and splicing tools. A razor blade, splicing block and splicing tape ( bought through eBay and a nice guy at JOA ) with a bit of patience ....and now I have 4 backups in addition to the three installed cartridges. Much cheaper than a rewind & postage.

I also have learned the ins an outs of the machines in addition to demagging the heads and cleaning the tape path with fluid from this company -

https://www.americanrecorder.com/detail.php?id=941

You can even clean the roller with this stuff.

Now I can tech these without worry. I would have to have a major electrical problem to be out of my element. Now I do not worry about taking these on the road or gigging anywhere.:drink:drink:drink
 

Loop-Master

Member
Messages
3,518
I went to this site many times over the years for education an inspiration to tech my tape delays.

http://www.regiscoyne.com/echoplex/

At the bottom are some suggestions for parts, etc.... I ended up buying tape from JOA and rewinding tapes myself with a little homemade jig and splicing tools. A razor blade, splicing block and splicing tape ( bought through eBay and a nice guy at JOA ) with a bit of patience ....and now I have 4 backups in addition to the three installed cartridges. Much cheaper than a rewind & postage.

I also have learned the ins an outs of the machines in addition to demagging the heads and cleaning the tape path with fluid from this company -

https://www.americanrecorder.com/detail.php?id=941

You can even clean the roller with this stuff.

Now I can tech these without worry. I would have to have a major electrical problem to be out of my element. Now I do not worry about taking these on the road or gigging anywhere.:drink:drink:drink

Awesome! Yes, Regis is a great site.
 




Trending Topics

Top