Got my RockOn Pedalboard

Hay Jaz, any jpegs?

 

Here's a pic of my RockOn board...



Nice product at a nice price...

 

Here's mine - if you bought the smallest model from Reverend and want to put 6-8 smaller sized pedals, the George L's are just about the smallest profile connectors I've found. It REALLY helps if some of the pedals' jacks are offset (like on my Blue Boy). I still have room for one more on mine...

 

lava cables. Set 'em and forget 'em. Mark uses top of the line quality products in his cables and I'm extremely happy with 'em

http://www.lavacable.com/

 

??

works fine for me

clear your cache and cookies, restart your browser, and try again

 

What pedals are you using with your board?

In the interest of saving space, I use George L's on my pedal board.

David

 

I haven't felt the need to screw the wah down, the velcro they include is pretty strong stuff. I treat my gear pretty gently though, might be appropriate if you tend to toss stuff in your trunk.

 

My wah comes and goes off of my board so I just took the feet off and put a strip of velcro down the entire bottom. It stays on the board just fine.

David

 

I use wah mounting plate from Stompin' Ground.

 

With the existing plate, the screw heads stuck out so that it wasn't flush with the board. Until I got th emounting plate I was never sure if my wah would stay put...

 

That's what I did. The velcro patch on the board is wider than the pedal, so the screws don't hit anything hard to make it want to lift or not seat securely - and I used abot 2x the amount of velcro than what's pictured on that plate adapter. I can actually lift my whole board off the ground grasping the wah by itself...

 

Check this out-

http://www.thegearpage.net/board/showthread.php?s=&threadid=106976


I got one and it works well. Other than buying one I have no connection w/ the seller.

 

I am loving my RockOn PedalMax that I got thru Reverend.

"How do you guys mount your heavier pedals like the wah pedals? Screws through the board into the pedal?"

J, on my RMC, I flipped the bottom plate over (to preserve that great picture of Geoffrey Teese!) and put a long strip of high-grade velcro on. I went to the hardware store and got some flat-head screws to replace the rubber feet. Even though the screws stick out a tiny bit, the velcro still holds the wah great- you have to use both hands to rip it off!

Enjoy the board!

 

I use bike chain links on my RMC2. It works well, as long as you have a pedalboard with either thick enough wood, or enough clearance between the outer case and the deck wood, to accomodate the screws.