Guitar Rig 4 level problems

Discussion in 'Digital & Modeling Gear' started by sonofmickel, Feb 16, 2012.

  1. sonofmickel

    sonofmickel Supporting Member

    Messages:
    96
    Joined:
    Sep 13, 2010
    I have GR4 and Duet 2 for the interface. Guitar plugged into Duet XLR combo jack, level set to "Instr".
    Guitar rig is set up and plays fine, but it is clipping at even low levels. I can set it up where it will not clip but the levels are now very low.

    Set unity gain in GR4 and "0" for the "Instr" input on the Duet 2 causes clipping. So I lower the input to GR4 and the sound is anemic. So I raise the input to unity in GR4 and lower the output in GR4 to -7. No clipping but low levels. Weird.
     

Share This Page