Help with my Marshall JCM 2000

Discussion in 'Amps and Cabs' started by Turtleman, Dec 17, 2009.

  1. Turtleman

    Turtleman Member

    Messages:
    7
    Joined:
    Dec 7, 2009
    Hi - i just had my JCM 2000 retubed and biased. When i got it home and plugged in i had absolutley no sound !!! I called the shop and they said must be something wrong with my cabinet - however after plugging the head in through my mixer (emulated line out) i still have absolutley no signal so i'm pretty sure it's not the cabinet. Any help with this would be appreciated.
     
  2. bemeyer

    bemeyer Member

    Messages:
    205
    Joined:
    Mar 9, 2006
    Take it back to the shop. The 2000's are notoriously unreliable. One thing I'd try are the fusz's. They go all the time.
     
  3. Turtleman

    Turtleman Member

    Messages:
    7
    Joined:
    Dec 7, 2009
    Thanks Bemeyer - i did check the two fuzes and they look good (ie they are not broken or black) However, is there still a chance that they may be blown? I don't know much about this so i appreciate the help thenk you.

    Turtle
     
  4. EastCoastRocker

    EastCoastRocker Member

    Messages:
    1,250
    Joined:
    Sep 30, 2009
    What any decent amp guy would have said was "bring it back in".
    I suggest that you do.

    Before you do, check all the dumb stuff like volume knob on the guitar, 1/4 in cable, is the speaker plugged in and is it in the correct OHM value,etc.
     

Share This Page