Honey BeesT voltage question

Discussion in 'Effects, Pedals, Strings & Things' started by AlisterHag, Feb 28, 2012.

  1. AlisterHag

    AlisterHag Member

    Messages:
    305
    Joined:
    Nov 9, 2011
    Just got my Honey Beest and I am really digging it so far!

    I only use a Pedaltrain mini though and I am wondering if I can run into the 12v input on my Iso-5. I am also running my tuner, DAM Red Rooster, and RS Phaser so I am out of 9v spots.

    I have read that it runs 5-15v, but what about the 12v 300ma on the Iso-5?
     
  2. NakedInTheRain

    NakedInTheRain Member

    Messages:
    2,230
    Joined:
    Aug 14, 2010
    Location:
    Melbourne, Australia
    i think 12 is between 5 and 15...
     
  3. AlisterHag

    AlisterHag Member

    Messages:
    305
    Joined:
    Nov 9, 2011
    Ha smartie, I am more concerned with the 300ma.
     
  4. jnepo1

    jnepo1 Silver Supporting Member

    Messages:
    13,220
    Joined:
    Oct 23, 2009
    Location:
    Sutton, MA
    The 300mA s not the concern, as the pedal will only use the required mA. It's the voltage that is the most concern. As long as the effect can take the voltage, you should be perfectly fine.
     
  5. jnepo1

    jnepo1 Silver Supporting Member

    Messages:
    13,220
    Joined:
    Oct 23, 2009
    Location:
    Sutton, MA
    You could also daisy chain or use a "Y" power cable to power the effect along with another pedal off of the 9V taps. Just don't exceed the 100mA ceiling of the tap.
     
  6. AlisterHag

    AlisterHag Member

    Messages:
    305
    Joined:
    Nov 9, 2011
    Great thx for the info!
     
  7. Don Rusk

    Don Rusk Biggus Bearfootus Vendor

    Messages:
    6,996
    Joined:
    Jul 22, 2002
    Location:
    St. Louis
    Yeah 12v. 300ma will be fine ....
     

Share This Page