I'm a Moron.

Discussion in 'Luthier's Guitar & Bass Technical Discussion' started by Metalmike117, Mar 2, 2015.

  1. Metalmike117

    Metalmike117 Member

    Messages:
    163
    Joined:
    Dec 26, 2007
    Location:
    Boston
    I have a classic player strat with the 60’s pickups in it.

    On Saturday, I put a Dimarzio tone zone S in the bridge. I removed the original pickup and soldered the wires from the tone zone, exactly to where the wires were connected with the stock PU.

    Now with the switch in the bridge position, the bridge and middle pickups are live, then on the 2nd position just the middle pickup are live. I looked at every diagram I could find, no matter what I do the both bridge and middle pickups are on in the first position.

    Any thoughts?
     
  2. Tonebender

    Tonebender Supporting Member

    Messages:
    564
    Joined:
    Jan 24, 2004
    Location:
    NYC
    Hey, everyone makes mistakes!

    -Gonna need a good pic of your wiring to suss this one out....
     

Share This Page