Is my cab wired correctly?

Discussion in 'Amps and Cabs' started by electricfurnace, Feb 8, 2015.

  1. electricfurnace

    electricfurnace Member

    Messages:
    5
    Joined:
    Nov 12, 2009
    Marshall 4x12 1960AX, mono single input.
    Four 16ohm speakers. Is this wired properly for 16ohms operation? Cheers Alex


    [​IMG]
     
  2. Nelson89

    Nelson89 Member

    Messages:
    3,585
    Joined:
    Aug 27, 2010
    Location:
    Sydney, Australia
    [​IMG]

    Looking at the way you've wired i'm gonna say no. Don't wire the two top speakers together,
    1. plug the positive terminals together on the left two,
    2. plug the two positive terminals together on the right two,
    3. plug the two negative terminals together on the left two,
    4. plug the two negative terminals together on the right two,
    5. plug the positive terminal from the bottom right to the negative at the bottom left
    6. plug the negative terminal from the top right to negative on the speaker socket
    7. plug the positive terminal from the top left to positive on the speaker socket
     

Share This Page