Modded Direct Drive Help

[yZe]

On the old one, it had the push/pull tone knob
QUESTION 1:
How do I operate the 4 dip switches on the new one in order to get the same sound w/the fat harmonics with the tone knob pulled on the old one

His sheet didn't explain this, nor does he have anything on the web site regarding what each switch does

QUESTION 2:
What does each individual dip switch do?

QUESTION 3:
When the dip switches are pushed all the way back, are they on or off?

 

[RDM]

Everything is on the website under the "Custom Shop" section

http://barberelectronics.com/Mod%20PCB%20manual.doc
http://barberelectronics.com/custom shop/Mod_page.html

You can also just call or email the shop.

 

[yZe]

thanx !

 

[yZe]

However, this question remains, and i waiting for david to email me back

How do i configure the DD pedal to nail exactly the tone knob pulled out mode ?

 

[RDM]

But if you do that.....then what will happen when you do pull the tone knob?

I don't know if I want to know what will happen. Oh.....the power inside that little black box can be deadly...........

 

[yZe]

David said you just nail the internal harmonic control & adjust the mids

Lots of tweaking to do

 

[DreamTheaterRules]

this is straight from Dave because I have a DD w/ mod board and a regular one. With the harmonics dial all the way up, it's like the up position on a regular DD. With it all the way down, its like the down position. So, the mod board doesn't offer anything on the "outside" of the two positions, but it does offer ANYWHERE in between.