Mooer ge250 midi capabilities

[Ejay]

Im trying to figure out if the ge 250 would work as a midicontroller.
Manual refers to “midi mapping”...but no breakdown of what that actually does.

Anyone knowledgeable about this...what can it do?
PC only?...CC + values? Option to send a different set of midi data on 2nd click of the same preset button? Different midi data on hold?

 

[pandy]

Yeah I have similar question https://www.thegearpage.net/board/index.php?posts/29983551/
Also wondering If Ampero Hotone also has this feature.

 

[Watt McCo]

Im trying to figure out if the ge 250 would work as a midicontroller.
Manual refers to “midi mapping”...but no breakdown of what that actually does.

Anyone knowledgeable about this...what can it do?
PC only?...CC + values? Option to send a different set of midi data on 2nd click of the same preset button? Different midi data on hold?

Looking at page 34/35 of the manual -- it looks like all you got is time sync and PC value:

https://v1.cecdn.yun300.cn/fsite_1804040320/GE250_Manual_07.pdf

 

[Elantric]

While they respond to external MIDI Messages, Both have minimal MIDI Controller transmit functions


Ampero lacks MIDI OUT jack

Helix still rules as a MIDI Controller with Command Center

 

[pandy]

But can you use them as MIDI controller in Amp sim/DAW over USB?

 

[Ejay]

Looking at page 34/35 of the manual -- it looks like all you got is time sync and PC value:

https://v1.cecdn.yun300.cn/fsite_1804040320/GE250_Manual_07.pdf

thnx..i did noticed those...probably linking PC to presets (looking at the 300 manual)...but I was hopping for a bit more

While they respond to external MIDI Messages, Both have minimal MIDI Controller transmit functions


Ampero lacks MIDI OUT jack

Helix still rules as a MIDI Controller with Command Center

thnx...so PC only on preset selection?

 

[Elantric]

thnx..i did noticed those...probably linking PC to presets (looking at the 300 manual)...but I was hopping for a bit more




thnx...so PC only on preset selection?

Not sure I have GE 300 not GE250

Mooer MIDI support is very minimal