Multieffect Midi output commands on preset change.

otherusername

Member
Messages
22
I've done my searches yet cannot find a multieffect that can send Simultaneous MIDI program changes per preset or Simultaneous MIDI CC commands per preset. Does any multieffect do this? Is there are box that I can put inline to output simultaneous MIDI changes per one input command? The midisolutions.com MIDI event processor seems to have the functionality but too little "rules" to map 20 input commands to, say, 100 output commands, 5 per each. Suggestions?
 

jb4674

Member
Messages
6,939
What devices are you trying to use and what equipment do you currently have (foot controller, etc.)
 

gumtown

Member
Messages
2,120
The Boss GT MFX range send program change on every patch, and can be setup to send cc# data on the pedals and EXP pedal.
The Roland FC-300 midi controller can be setup to send multiple commands, same with the Behringer FBC-1010 with one of the after market upgrade chips.
 

drwiddly

Member
Messages
392
If I'm reading your question correctly, I'm assuming you want a floor based multi fx that can send assignable PC and CC changes? I'm not too clued up with floor fx so I don't really know.

If you go 'rack' you could get a Behringer FCB1010 with the Un0 chip. This will allow up to 5 PC commands (4 in stompbox mode) + 2 CC commands (on switch) and 2 CC commands on the expression pedals per patch. There are also 2 relay switches for switching amp channels, if you need them. If you're using more than one piece of equipment, you may want to have them set on different midi channels and the FCB allows the 5 PC commands to be set on different midi channels on a global basis.

All this allows for far more flexibility than most people need so should cover your requirements.
 

mach90

Member
Messages
223
most wont do what your wanting you need a dedicated midi foor controller for that
the roland FC300 allows you to send multipe upt to 10 or more individual pc cc comands with patch on or off.

one other way would be to use midi solutions programmable event processor. That will recieve any command and then transmit one or mor pc cc, sysex messages etc.
 



Trending Topics

Top Bottom