need 100VAC, 1000pf capacitor

dave6

Member
Messages
274
been looking EVERYWHERE. does anyone have one?



dave




it's going in a fender ultimate chorus practice amp.
 

Power Freak

Member
Messages
207
1000pF = 1nF = 0.001uF

Does that help?

EDIT: I don't know many stores in the US but Mouser should have one.
 

dave6

Member
Messages
274
the cap is the barrel type with a lead coming out of each end. i don't know what type of material though. it's an orange type non see through cap.



dave
 

calieng

Member
Messages
714
Dave,

There is an electronics surplus store here in San Diego that I get a lot of parts from when I scratch build amp kits. I got some various 500V silver mica caps the other day for $0.25 each

I'll see if they have 1000pF...I'm pretty sure they did.

Email your address if that is what you need and I'll send you a few.

Chris

P.S. I'll check specifically for 100VAC barrel type.
 

scottl

Member
Messages
17,063
Dave,

You can use higher rated caps with absolutely no issues. Those caps are everywhere. .001uf is a common value. You can bend the legs on an Orange Drop and voila.....
 

calieng

Member
Messages
714
...ok I stopped by the store on my lunch break..

I picked up .0013uF radial 100V, .001uF mylar 100V, and 1000pF 300V silver mica...there was actually about 20 different types at the surplus store that would have worked for you.

They were only $0.25 each and it is just two blocks from my office so it was no trouble.

I'll drop them in the mail tonight.

Chris
 

calieng

Member
Messages
714
Dave,

Still don't have your mailing address....

Please send it to me if you still need the caps.

Chris
 




Trending Topics

Top