Need help wiring a Fralin Unbucker in a Grosh RC

Discussion in 'Luthier's Guitar & Bass Technical Discussion' started by cg, May 21, 2006.


  1. cg

    cg Silver Supporting Member

    Messages:
    5,737
    Joined:
    Jan 4, 2002
    Location:
    St Paul, MN
    It has four wires:
    White = hot
    Black = ground
    Red = center tap
    Shield = ground


    If I am not setting this up for coil tapping, can I solder the white and red wires together?




    [​IMG]
     
  2. K-man

    K-man Member

    Messages:
    1,060
    Joined:
    Feb 3, 2006
    Location:
    CT
    If you are not coil tapping, then wire the red and green together. The white is the hot and goes to the volume pot. Black to ground.
     
  3. cg

    cg Silver Supporting Member

    Messages:
    5,737
    Joined:
    Jan 4, 2002
    Location:
    St Paul, MN
    There isn't a green wire. Just these 4:

    White = hot
    Black = ground
    Red = center tap
    Shield = ground

    Where does the red go?
     
  4. K-man

    K-man Member

    Messages:
    1,060
    Joined:
    Feb 3, 2006
    Location:
    CT
    Oops, sorry. My guess is you'd just tape the red wire up and not connect it to anything. You should email Fralin to be sure.
     
  5. cg

    cg Silver Supporting Member

    Messages:
    5,737
    Joined:
    Jan 4, 2002
    Location:
    St Paul, MN
    That worked. Thanks!
     

Share This Page