**Need help with getting guitar signal from interface to the computer/Logic!

Discussion in 'Recording/Live Sound' started by Jloveland87, Mar 3, 2012.

  1. Jloveland87

    Jloveland87 Member

    Messages:
    132
    Joined:
    Feb 8, 2012
    Location:
    Melbourne, FL
    Hey I have a MI-Audio ProFire 610 interface that I'm running into my mac desktop with snow leopard and I can't seem to figure out how to get my signal to come through. I have everything hooked up correctly, I go to system settings on the desktop and change my input to the profire and when I strum it shows good signal strength. Now I open up Logic and I can't get that signal to play through my speakers...very frustrating. Is there some simple step to this that I'm missing? Maybe a setting in Logic or something?

    Any help would be greatly appreciated!
     
    Last edited: Mar 3, 2012
  2. thisHEREgiraffe

    thisHEREgiraffe Member

    Messages:
    104
    Joined:
    Oct 17, 2010
    A few things to check first...

    1. In logic check the audio tab in the preferences menu is set to your interface.

    2. Make sure your I/O in the mixer tab is set correctly for each track.

    3. Tracks need to be "record enabled" for you to monitor them.
     
  3. Jloveland87

    Jloveland87 Member

    Messages:
    132
    Joined:
    Feb 8, 2012
    Location:
    Melbourne, FL
    I'll be home in a little bit and I'll check those and see if that solves it..
     

Share This Page