New Firmware Release For..

Discussion in 'Digital & Modeling Gear' started by fakeox, Feb 14, 2011.

  1. ALOfYRSnfWhres

    ALOfYRSnfWhres Member

    Messages:
    451
    Joined:
    May 23, 2017
    GT-1 System Program (Ver.1.07)
    How to tell the version
    Please check the version of the system working on your GT-1 before downloading the archive file.
    1. Hold down the [ ENTER ] button and connect a cable to the INPUT jack to turn on the power.
      The current version is shown on the display.
    2. Disconnect the cable to turn off the power.
    * Don't perform the update if the product is already up-to-date.
    Update history
    [ Ver.1.07 ] JUN 2017
    Bug Fix
    The following bug was fixed.
    • When switching patches, it may take a while until the pitch-shifted sound is output.

    [ Ver.1.05 ] OCT 2016
    Bug Fixes
    The following bug were fixed.
    • The sound fails to change when "OUTPUT SELECT" is used to switch the amplifier type while headphones are connected to the PHONES jack.
    • The indicators for the UP, DOWN, and CTL1 switches sometimes flash at tuner startup.
    • DELAY sometimes fails to be applied during EASY EDIT changes.
    • Noise sometimes occurs when TYPE is changed for OD/DS or PREAMP.
    • Noise sometimes occurs when REVERB TYPE is changed from DELAY to another TYPE setting.
    • Executing a factory reset for the GT-1 while BOSS TONE STUDIO for GT-1 is connected results in unmatching displays on the GT-1 and in BOSS TONE STUDIO.
    • The color of the [UP] and [DOWN] switches remains lighted in red.
    • When the [UP] or [DOWN] switch is used to select a patch number, the switch color sometimes lights up in red.
    • ON/OFF is displayed on the editing screen for NS (NOISE SUPPRESSOR).
    Functionality Improvements
    • The trigger position when switching TUNER on and off by operating an expression pedal has been corrected.
    • The characteristics of "OUTPUT SELECT" when PREAMP TYPE is BGNR UB or ORNG ROCK have been corrected.
    • The functioning of CTL1 was set to OFF when not using TAP DELAY with EASY EDIT.

    What you will need to update your GT-1
    • GT-1
    • Guitar cable
    • USB cable
    • A computer with a USB connector ( Windows, Mac OS X )
    Caution when performing the update
    • Never apply this update data to any product other than the GT-1. This update data may destroy the data or system program of other products.
    • Never power-off your GT-1 while the update is in progress!
      If a power failure or similar accident occurs during the update process, the GT-1 won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
    • We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.
    Getting the update file
    Please open/extract the downloaded "gt1_sys_v107.zip" file on your computer to get the two update files named "ROMINFO.TXT" and "GT-1ROM.BIN" in the "gt1_sys_v107" folder.
    Procedure for the update
    Caution
    • You must not rename the extracted files.
    • Never turn off the GT-1's power while the update is in progress. Otherwise the system program or the GT-1 itself may be destroyed.

    Please install the extracted system program files into your GT-1 according to the following procedure.
    1. Hold down the [ EXIT ] button and connect a cable to the INPUT jack to turn on the power.
      The message "GT-1 Updater" will appear on the display.
    2. Connect the computer to the GT-1's USB port by a USB cable.
      The message "USB Connected." will appear on the display.
    3. Open the BOSS_GT-1 icon.
      "Removable Disk (*:)" may appear instead of the BOSS_GT-1 icon.
    4. Copy (drag and drop) all the files included in the "gt1_sys_v107" folder into the "BOSS_GT-1" icon.
      * Do not copy the "gt1_sys_v107" folder.
    5. Disconnect the BOSS_GT-1 from the computer.
      With Windows 10 / Windows 8 / Windows 7
      Right-click on the "BOSS_GT-1" icon in My Computer (or the "Removable Disk (*:)" icon) and execute "Eject."
      With Mac OS
      Drag the "BOSS_GT-1" icon to the Trush icon in the Dock.
    6. Disconnect the USB cable.
      The message "Push [WRITE] to start." will appear on the display.
    7. Press [ WRITE ] button to start the update process.
    8. The message "Completed." will appear on the display when the update process completes.
    9. Turn the GT-1 power off.
      Please verify the version number "1.07" with the procedure described in "How to tell the version" part of this document.

      https://www.boss.info/global/suppor...drivers/180038fb-efcd-4ddb-ae88-30c825c42c67/
     
  2. jzgtrguy

    jzgtrguy Member

    Messages:
    6,046
    Joined:
    Nov 28, 2006
    Now available for immediate download, AX8 Quantum v8.02 Public Beta. Please note, that this is BETA firmware, and as such, may contain bugs or other unforeseen consequences. Please, as always, backup your AX8 with Fractal-Bot before proceeding with this upgrade.

    AX8 V8.02 Public Beta

    Release Notes:

    AX8 V8.02 implements the new Amp Modeling improvements and fixes introduced by the Axe-FX Quantum 8.01 & Quantum 8.02, as well as 5 new cabinets. These custom mixes represent a small sample of the world-class IRs now available from Celestion. The full IR packages can be purchased at their new website: www.celestionplus.com

    Additions:
    • Added (at Kirk Hammett’s request) modifier capability to the output compression parameter (“COMP”) in the Amp block (previously named “OUTPUT COMP”).
    • Added five new factory cabs. These custom mixes represent a small sample of the world-class IRs now available from Celestion. The full IR packages can be purchased at their new website: www.celestionplus.com
    • All types in the Compressor block now support both Filter and Emph parameters. These parameters control the detector filtering. Filter is a low-cut filter and Emph is a high-frequency emphasis. These parameters can be used to tailor the response of the various compressor types to different material.
    Fixes:
    • Fixed bug where presets that use a User Cab(s) and were saved under earlier firmware versions might have the incorrect User Cab(s) assigned when recalled on later firmware.
    • Fixed minor bug in Amp block output transformer modeling which caused slight attenuation of upper treble frequencies. This results in clearer, more chimey tones.
    • Fixed mistake in “Citrus RV50” amp model.
     
    pima1234 likes this.
  3. jzgtrguy

    jzgtrguy Member

    Messages:
    6,046
    Joined:
    Nov 28, 2006
    The much anticipated release of the AX8 V8.02 firmware, containing Quantum 8, is now available for immediate download! Please, as always, backup your AX8 with Fractal-Bot before proceeding with this upgrade.

    AX8 V8.02

    In support of the release, there are new factory presets based on the Axe-Fx II Bank A presets for Quantum 8.02.

    AX8 V8.02 Factory Presets

    Release Notes:

    AX8 V8.02 implements the new Amp Modeling improvements and fixes introduced by the Axe-FX Quantum 8.00, 8.01 & Quantum 8.02, as well as 5 new cabinets. These custom mixes represent a small sample of the world-class IRs now available from Celestion. The full IR packages can be purchased at their new website: www.celestionplus.com

    Additions:
    • Improved amp modeling. Improves clarity and sounds more “open” especially for non-MV amp models or when the MV is turned up.
    • The bias excursion values for most amp models have been updated based on new measurement techniques. Existing presets will automatically be updated to the new values.
    • Based on user feedback the Amp block Speaker Drive now defaults to zero.
    • Increased gain of “Brit Brown” model by 12 dB.
    • Added “5F1 Tweed EC” based on a Fender Eric Clapton Vibro-Champ.
    • Added (at Kirk Hammett’s request) modifier capability to the output compression parameter (“COMP”) in the Amp block (previously named “OUTPUT COMP”).
    • Added five new factory cabs. These custom mixes represent a small sample of the world-class IRs now available from Celestion. The full IR packages can be purchased at their new website: www.celestionplus.com
    • All types in the Compressor block now support both Filter and Emph parameters. These parameters control the detector filtering. Filter is a low-cut filter and Emph is a high-frequency emphasis. These parameters can be used to tailor the response of the various compressor types to different material.
    Fixes:
    • Fixed “quantization” noise when Amp block Transformer Drive parameter is set to its minimum value and a lot of gain is applied after the block. This specifically addresses the “Tube Pre” model as the default Transformer Drive is at the minimum.
    • Fixed Amp block Preamp Hardness parameter not “sticking”.
    • Fixed bug where presets that use a User Cab(s) and were saved under earlier firmware versions might have the incorrect User Cab(s) assigned when recalled on later firmware.
    • Fixed minor bug in Amp block output transformer modeling which caused slight attenuation of upper treble frequencies. This results in clearer, more chimey tones.
    • Fixed mistake in “Citrus RV50” amp model.
    • Removed the Dry Delay parameter from the Flanger as it has never been functional in the AX8.
    • Fixed a bug in the Delay that caused audio problems when attaching a controller to the Diffusion parameter.
     
    pima1234 likes this.
  4. Yek

    Yek Member

    Messages:
    1,186
    Joined:
    Dec 28, 2003
    Location:
    Netherlands
    Fractal Audio FX8 (MkI and MkII), firmware 5.03

    Release Notes:

    FX8 V5.03 is a minor enhancement release incorporating the Axe-FX Quantum V7.01, V7.02, and V8.02 changes.

    Additions:
    • Added Input Diffusion to Multitap block Band Delay, Quad Series, Plex Delay, Plex Detune and Plex Shift types.
    • Added two new “Optical” types to Compressor block. The Optical 1 type is based on classic optical tube compressors famed for their smooth sound. Use before the Amp block to smooth out your licks and increase sustain. Use after the Amp block for instant “Hit Record” sound. The Optical 2 type is similar to Optical 1 but uses a true RMS detector.
    • Added Input Level switch to Pedal and Optical types in Compressor block. Use “Instrument” when compressor is placed before Amp. Use “Line” when compressor is placed in the amp’s effect loop.
    • Added “Shimmer Drive” type to Drive block.
    • Improved CPU performance 1% to 3% depending on the preset. (As always, your mileage may vary)
    Fixes:
    • Fixed Optical and Pedal compressors output level dependent upon Ratio parameter of Studio type. If using these types in existing presets the presets should be auditioned to ensure the volume is correct.
    • Fixed switching between Optical compressor types can cause brief level drop.
    • Removed the Dry Delay parameter from the Flanger as it has never been functional in the FX8.
    • Fixed a bug in the Delay that caused audio problems when attaching a controller to the Diffusion parameter.
     
  5. fakeox

    fakeox Member

    Messages:
    2,187
    Joined:
    Jul 18, 2004
    Location:
    The Great White North
    Kemper

    KEMPER/July 4

    beta (5.3)
     
    Jose7822 likes this.
  6. VCuomo

    VCuomo Member

    Messages:
    15,369
    Joined:
    Nov 5, 2003
    Location:
    Southern California
    Full text of KPA 5.3 Beta details from the Kemper Profiler User Forum:

    5.3.0.13018 Public Beta is now available as download package (select Operating System Beta versions) and via Rig Manager automated update, if Beta Releases are selected in user preferences.

    Rig Manager’s 2.0 revision is required minimum!

    This operating system introduces the following new features and fixes:

    Audio

    added: Mix parameter in Treble Booster and Lead Booster
    added: Ducking parameter, if Treble Booster or Lead Booster are used in stereo Modules
    changed: Mix control of Distortion effects improved. Level is unity at Mix 0%
    changed: Direct Out/Send muted immediately, if Effect Loop gets deactivated
    changed: reduced latency of Pitch Shifter effects incl. Transpose
    changed: sound of Formant Shifter improved in combination with Pitch Shifter effects
    changed: Freeze Formants in Pedal Pitch improved
    changed: Freeze Formants option added in Pedal Vinyl Stop
    changed: Formant Shift as continuous controller in Pedal Pitch not useful and obsoleted

    User Interface

    added: Remote supports Profiler Mode
    added: new MIDI option “Pedals to MIDI” in System Settings enables pedal controllers CC#1, 4, 7, and 11 to be sent to two external MIDI devices, even if triggered by pedals connected to Profiler or Remote
    added: Master Volume display reflecting all output volumes to better illustrate its functionality
    added: with the new option “Signal LEDs Blue” in the System Settings the color of the Input and Output LEDs can be changed
    added: new warning indicating MIDI buffer overflow, if too many program chances are received within too short time frame
    added: Profiler doesn’t try to restore corrupted backup files
    fixed: MIDI clock display stabilized
    fixed: correct handling of Pedal Volume after Rig change, if “WahPedal to Volume” is enabled
    fixed: correct processing of MIDI controlling changes immediately following a program change
    fixed: logical conflicts between Morph Pedal and Morph Button
    fixed: disabled Slots accidentally appear as enabled
    fixed: Uno4Kemper conflict with relative addressing in Browser Mode
    fixed: default Pitch if “WahPedal to Pitch” or “MorphPedal to Pitch” are activated
    fixed: Tuner Mode exits Performance scrolling
    fixed: erroneous Locking after Mode changes
    fixed: erroneous Morphing of Slot 4 in Performance edit buffer after restart
    fixed: polarity option for external switches gets ignored, if a pedal is configured
    fixed: correct handling of “Delay on/off Tail” triggered via external switch
    changed: “Power Amp On” instead of “Power Amp” in PowerHead and PowerRack Output Section
    changed: scale of Crystal Mix und Pitch Mix parameter changed to 0-100%
    changed: option to display time on Remote on page Date and Time in System Settings (had been hidden feature before)
     
    Jose7822 likes this.
  7. BuleriaChk

    BuleriaChk Silver Supporting Member

    Messages:
    780
    Joined:
    May 22, 2008
    Location:
    Santa Barbara, CA
  8. fakeox

    fakeox Member

    Messages:
    2,187
    Joined:
    Jul 18, 2004
    Location:
    The Great White North
    Headrushfx/ july 14
    www.headrushfx.com
    V. 1.1
    ______________________________________________________________
     
  9. MixMinisterMike

    MixMinisterMike Supporting Member

    Messages:
    1,090
    Joined:
    Mar 14, 2015
    Location:
    USA
    BOSS GT-1B v.1.02

    https://www.boss.info/us/support/by...drivers/4dc785af-c865-4da4-9e24-1355cd19505a/

    Update history

    [ Ver.1.02 ] JUL 2017
    Functionality Improvement
    • Pitch-detection performance by BASS SYNTH and RING MOD was enhanced.

    How to tell the version
    1. Hold down the [ ENTER ] button and connect a cable to the INPUT jack to turn on the power.
      The current version is shown on the display.
    2. Disconnect the cable to turn off the power.
     
    Last edited: Jul 22, 2017
    FuzzFacetious likes this.
  10. ALOfYRSnfWhres

    ALOfYRSnfWhres Member

    Messages:
    451
    Joined:
    May 23, 2017
    MS-3 System Program ( Ver.1.03 )
    How to know the version
    Before you start, check the system program version of your MS-3.
    1. While holding down [ ENTER ], turn power ON.
      Continue to hold down ENTER until the BOSS logo appears on the display.
    2. After a short while, the version information appears on the display.
      If this shows the latest version (version 1.03 or later), there's no need to update your MS-3.
    3. After verifying the displayed version, switch off the power.

    Update history
    [ Ver.1.03 ] AUG 2017
    Additional Function
    • Support for MS-3 Editor/Librarian Added
    Bug Fixes
    The following bugs were fixed.
    • When DELAY TIME is set to notes, the TAP illumination time is incorrect.
    • When "KNOB ASSIGN = BPM" is in effect, the state when PREF for BPM has been switched using SYSTEM<=>PATCH is sometimes erratic.
    • The only value that can be selected for PEDAL BEND - PITCH - MIN/MAX using ASSIGN is "0."
    • After a PATCH CHANGE operation, CTLOUT is sometimes in an unintended state.
    • At the EFFECT CHAIN screen, if a CTL IN jack is disconnected or when the FS-5L is ON (LED illuminated), EFFECT TYPE is sometimes unselectable.
    • The internal state of ASSIGN TARGET = MIDI CC# is not reset by a patch change.
    • When the OUTPUT SELECT value for PREFERENCE is changed, the setting fails to be applied until the power is reset.
    Change the specifications
    • The specifications have been changed so that during continuous INC/DEC of PATCH/BANK by external control, REPEAT is stopped when PATCH MIN/MAX is reached.
    • The specifications have been changed so that when BPM TAP or DLY TAP is assigned to the MEMORY/MANUAL switch, the indicator flashes in MEMORY MODE as well.
    • The specifications have been changed so that WAIT can be used when using CTL IN to perform a BANK UP/DOWN operation.

    What you will need to update your MS-3
    • MS-3
    • USB cable
    • A computer with a USB connector ( Windows, Mac )
    Caution when performing the update
    • If you update on the normal mode of MS-3 against the correct procedrue, this update data may destroy the system program.
    • Never power-off your MS-3 while the update is in progress!
      If a power failure or similar accident occurs during the update process, the MS-3 won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
    • We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.
    Getting the update file
    Please open/extract the downloaded "ms3_sys_v103.zip" file on your computer to get the update files named "MS3ROM.BIN" and "ROMINFO.TXT" in the "ms3_sys_v103" folder.

    Procedure for the update
    1. Connect the computer to the MS-3's USB port by a USB cable.
    2. Hold down the octave key [EXIT] button and turn on the power.
      * Continue to hold down EXIT until "MS-3 Updater" appears on the display.
    3. Open the "BOSS_MS-3" drive folder in your personal computer.
      [ Windows users ]
      Within My Computer (or Computer), open "BOSS_MS-3" (or Removable Disk).
      [ macOS / OS X users ]
      On the desktop, open the "BOSS_MS-3" icon.
    4. Copy (drag and drop) the "MS3ROM.BIN" and the "ROMINFO.TXT" in the "ms3_sys_v103" folder into the root directory of the "BOSS_MS-3" drive.
    5. After the copy has been completed, unmount or remove the drive on your computer.
      With Windows
      Right-click on the "BOSS_MS-3" icon in My Computer (or the "Removable Disk (*:)" icon) and execute "Eject."
      With macOS / OS X
      Drag the "BOSS_MS-3" icon to the Trush icon in the Dock.
    6. Disconnect the USB cable.
      The message "Push [ENTER] to start." will appear on the display.
    7. Press [ ENTER ] button to start the update process.
    8. The message "Completed." will appear on the display when the update process completes.
    9. Turn the MS-3 power off.
      Please verify the version number "1.03" with the procedure described in "How to tell the version" part of this document.
    https://www.boss.info/global/suppor...drivers/b56cd8e9-9937-4acb-af47-26a2150529ae/
     
  11. Ed_Saxman

    Ed_Saxman Member

    Messages:
    176
    Joined:
    Dec 28, 2012
    Location:
    Barcelona
    VoiceLive 3 Update Available (366)

    This is the first VL3 update since build 355 in February 2016.

    Build 366 includes the following:

    New looper feature!
    AudioCue lets you arm a loop to begin recording with your input. Select a volume threshold in the "Looper" menu, arm a loop track for recording, and cue recording the loop when your input is louder than the chosen threshold. When a loop is armed, you can press another loop footswitch to cancel. You can also choose whether AudioCue applies to every loop, or just your first loop! (AudioCue settings are saved with the loop slot, not the preset)

    Remastered metronome sounds, improved the behavior logic, and metronome mute/enable is available as a Switch-3/6 target.

    DSP improvements to the synth/vocoder.

    Added notifications to inform you when the looper is active.

    Handful of bug fixes including: missing popup messages, loop trigger settings, external loop control, and overnight MIDI timeout.
     
  12. steve_rolfeca

    steve_rolfeca Member

    Messages:
    274
    Joined:
    Apr 19, 2007
    Location:
    London, Ontario, Canada
    Sneekyb and godoy.rafa like this.
  13. MixMinisterMike

    MixMinisterMike Supporting Member

    Messages:
    1,090
    Joined:
    Mar 14, 2015
    Location:
    USA
    FuzzFacetious likes this.
  14. stilwel

    stilwel Member

    Messages:
    2,219
    Joined:
    Jan 23, 2007
    Mustang GT v1.4.21


    Version 1.4.21 (Sept,18, 2017)

    • Fixed issue to avoid rare startup condition which could lead to loss of user presets.
    • Improved parameter sensitivity for several amp models.


    ...and I didn't see this one get posted last week.

    Version 1.4.19 (Sept 13, 2017)

    • On start-up, the Mustang GT will now load the last used preset rather than defaulting to preset 1.
    • Added a gain control for USB audio recording in the AMP SETTINGS menu.
    • Added a PRESET ORGANIZER menu item and moved the CLEAR PRESET and RESTORE PRESETS options into this menu.
    • Added a MOVE PRESET option in the PRESET ORGANIZER menu.
    • Added wrap around functionality to the SAVE AS preset list.
    • Fixed issue where the amp would reset to preset 1 after clicking Bluetooth RENAME in the menu.
    • Fixed issue with Global EQ settings not being sent to the Tone app resulting in differences between amp and app displays.
    • Fixed issue with Fuzz stompbox model where the Octave control was non-functional.
    • Fixed issue with the 60’s British amp model where the Cut control was non-functional.
    • Fixed issue with ‘59 Bassman amp model where limited number of cabinet models were available. All 16 cabinet models are now available.
    • Implemented enhancements to LOOPER.
    • Implemented enhancements to SETLISTS.
    • Various other bug fixes and enhancements.
     
  15. snouter

    snouter Member

    Messages:
    2,160
    Joined:
    Sep 16, 2006
    Location:
    Connecticut
    BOSS DD-500
    • Firmware update version 2.0 to be available in September 2017 for more versatility, flexibility, and creativity.
    Got the the DD, MD and RV and the sounds are amazing. The MD and RV have the split screen when using a distinct effect into each channel. The DD can do it, but hopefully they make it visible on the screen like the other two.
     
  16. nicolasrivera

    nicolasrivera Silver Supporting Member

    Messages:
    5,886
    Joined:
    Apr 5, 2010
    Location:
    Honduras
    Axe-Fx II "Quantum" Rev 9.00 Beta

    9.00

    Removed the “Motor Drive” and “Transformer Grind” algorithms and associated parameters from the Amp block. These have been replaced by the new “Speaker Compression” algorithm. This algorithm models the interaction of the power amp with the power compression of the virtual speaker. The “Spkr Comp” parameter controls the amount of virtual speaker compression. This value defaults to 3.0 when the Amp block is reset. It does not get reset when changing the model. If using the Axe-Fx II with a tube power amp and conventional guitar cab you may want to reduce this value to 0.0. The gain reduction meter shows the amount of virtual power compression (select the Spkr Comp knob to monitor the gain reduction). Typical guitar speakers compress between 3 and 6 dB depending upon construction, age, volume, etc. The default value is conservative and yields about 3 dB of compression.

    Note that the Master Volume control will interact considerably with the Speaker Compression algorithm as will the Presence and Depth controls. Higher values of Master Volume will cause more virtual speaker compression.

    Improved Delay block. Also reworked the Deluxe Mind Guy, Mono BBD and Stereo BBD delay models based on the improvements.


    Mark I/II:
    www.fractalaudio.com/downloads/firmware-presets/axe-fx-2/Quantum/9.0/axefx2_Quantum_9p00beta.zip

    XL:
    www.fractalaudio.com/downloads/firmware-presets/axe-fx-2/Quantum/9.0/AxeFx2_XL_Quantum_9p00beta.zip

    XL+:
    www.fractalaudio.com/downloads/firmware-presets/axe-fx-2/Quantum/9.0/AxeFx2_XLplus_Quantum_9p00beta.zip

     
  17. Pastafarian

    Pastafarian Member

    Messages:
    3,172
    Joined:
    Jan 3, 2017
    Location:
    So. NH
    New BOSS Katana Software


    Update history
    [ Ver.2.01 ] OCT 2017
    Additional Functions
    Please refer to the "KATANA Owner's Manual" for detailed information in the [ Owner's Manuals ].
    To make settings for added functions, use BOSS TONE STUDIO for KATANA Version 2.
    • A function to switch between BANK A/B has been added to TONE SETTING.
      Please refer to the "KATANA Series Version 2 Supplementary Manual" for detailed information in the [ Owner's Manuals].
    • "LINE OUT AIR FEEL" and "CABINET RESONANCE" were added.
    • "PHASE 90E" and "FLANGER 117E" were added to TYPE for MOD/FX.
    • "SDE-3000" was added to DELAY TYPE.
    • DELAY2, EQ (PATCH EQ), and GLOBAL EQ effect modules were added.
    • SEND/RETURN is now settable for each individual TONE SETTING value.
    • Setting the PC and CC numbers received by MIDI is now possible.
    [ Ver.1.02 ] OCT 2016
    Functionality Improvements
    • Support for BOSS TONE STUDIO for KATANA was added.
    • Noise when switching effects was reduced.
    Bug Fix
    The following bug was fixed.
    • No sound produced immediately after making a USB connection.

    What you will need to update your KATANA
    • KATANA
    • USB cable
    • A computer with a USB connector ( Windows, Mac )
    Caution when performing the update
    • Never apply this update data to any product other than the KATANA. This update data may destroy the data or system program of other products.
    • Never power-off your KATANA while the update is in progress!
      If a power failure or similar accident occurs during the update process, the KATANA won't be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
    • We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.
    Getting the update file
    Please open/extract the downloaded "katana_sys_v201.zip" file on your computer to get the two update files named "ROMINFO.TXT" and "KATANARM.BIN" in the "katana_sys_v201" folder.


    Also BTS 2 is here
     
    Last edited: Oct 2, 2017
    FuzzFacetious likes this.
  18. fakeox

    fakeox Member

    Messages:
    2,187
    Joined:
    Jul 18, 2004
    Location:
    The Great White North
    Sorry I haven't kept up with post 1 lately, not up to snuff.
     
    FuzzFacetious likes this.

Share This Page