Noisy Sansamp GT2...

Adiel1005

Member
Messages
6
Hey guys i'm new here and that my first post so excuse me if i have some spelling mistake...
So I made a trade on a Proco RAT II that i moded for early version 5 digits Tech 21 sansamp GT2.
and i do some changes on it:
I replace the power jack from 3.5mm positive DC input to a standard negative tip.
and replace the 100K linear potentiometer in the drive (cause the original do some whistling in 10 to 2 o'clock).
and now when the pedal is off i hear a noticeable noise and i guess it came from his buffer.
I'll be glad if someone will help me to solve that problem
Tnx! :)
 

drbob1

Gold Supporting Member
Messages
27,917
I always found the pedal a bit noisy in its higher gain modes. But after having modded it I'm really not sure. Sorry. Maybe pop over to freestomboxe.org or diystomboxes.com and ask for some help there. Be prepared with high resolution gut shots.
 

tech21nyc

Member
Messages
1,701
It's possible the original pot was dirty. It's hard for us to say without testing the pedal as this is not a common issue. The pedal cab be sent to us for evaluation and repair.

Tech 21 USA, Inc.
Tel: 973-777-6996
Fax: 973-777-9899
email: info@tech21nyc.com
 




Trending Topics

Top