pedal power 2+ courtesy outlet?

[gear007]

Can I plug a power strip in and power 3 9v pedals with wall warts (into the power strip) without doing damage? My board is full using the 8 regular power offerings, so I'd like to try to power the rest with the courteously outlet if possible. Thanks in advance.

 

[tjinca1]

I'd suggest plugging a 1spot into it instead.

 

[mcdes]

Can I plug a power strip in and power 3 9v pedals with wall warts (into the power strip) without doing damage? My board is full using the 8 regular power offerings, so I'd like to try to power the rest with the courteously outlet if possible. Thanks in advance.

yes, in theory you can, so long as it doesnt exceed whatever the limit is, which escapes me right now..... but, why dont you just daisy chain a few drives together, and make room for the extra pedals?

 

[wundergussy]

Get a few splitter cables and power two pedals off of one isolated out. Cheaper than a power strip and three wall warts, takes up less room on the board, and no worries of over-drawing.

 

[jb4674]

Get a few splitter cables and power two pedals off of one isolated out. Cheaper than a power strip and three wall warts, takes up less room on the board, and no worries of over-drawing.

I agree.

 

[4nd3h]

Depends on the pedals.

 

[gear007]

Get a few splitter cables and power two pedals off of one isolated out. Cheaper than a power strip and three wall warts, takes up less room on the board, and no worries of over-drawing.

This wont cause any noise issues? I like the idea.

 

[Toe]

Voodoo Lab actually sells a ground lifted splitter cable for the Pedal Power that supposedly reduces the risk of noise. http://www.voodoolab.com/shop/index.php?cPath=22_24_33&osCsid=sl9mblh8nh30ad2na1qq7a2fr7