plexitone + replica + PP2 = ?????

Discussion in 'Effects, Pedals, Strings & Things' started by boldaslove1977, Feb 21, 2012.

  1. boldaslove1977

    boldaslove1977 Silver Supporting Member

    Messages:
    4,368
    Joined:
    Jan 22, 2007
    Location:
    NYC/NJ>LA>Philly???
    power supply question...

    i've had a t-rex replica (12 volts) on my board for a few years... with it's own wall wart plugged into the courtesy outlet on a PP2 plus.

    i have a plexitone in the mail... which comes with its own AC cable.

    there's no way to run the plexitone and the replica off the same PP2, is there????

    i can never figure out power supply problems on my own... so i'll ask the experts...
     
  2. Less=more

    Less=more Member

    Messages:
    640
    Joined:
    Mar 24, 2010
    Location:
    Dundas, Ontario
    Your Replica just like mine can work on BOTH 12V AC and 12V DC!

    You need to use output 5 or 6 I think and put the dipswitch on the bottom in the opposite direction of the normal arrow, for 12v and the higher milliamps.

    Note you can confirm this via the manual/website and other forms.

     
  3. jnepo1

    jnepo1 Silver Supporting Member

    Messages:
    13,404
    Joined:
    Oct 23, 2009
    Location:
    Sutton, MA
    Yes, the Replica can run off of either #5 or 6 taps w/ the DIP switch away from normal. then plug the Plexitone into the accessory outlet. All set!
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice