So I got a KF-50....and it's blowing the 3/4a fuses

tradarama

www.PRIMEGUITARS.com
Silver Supporting Member
Messages
1,220
What does that mean?

I have some mismatched old Mullard XF2s in it 4ma apart. I tried setting the bias to 30ma. Anyone help?

Thanks! Jim
 

murkat

I like sea otters
Silver Supporting Member
Messages
1,749
call or email komet, Hogy or Mike. very heplful with there own stuff.
 

Blue Strat

Member
Messages
30,722
Blowing the HT (high voltage) fuse often means that one of your power tubes is shorted. Try pulling the power tubes and try again. If the fuse holds, set the bias pot to the lowest setting and try one tube at a time. The tube that causes the fuse to blow has a problem.
 

tradarama

www.PRIMEGUITARS.com
Silver Supporting Member
Messages
1,220
He is always there for me. I need to put him in my will.....

Power tubes will blow the 3/4a....it's them...problem solved.

Thanks to everyone who helped me!

Jim
 




Trending Topics

Top Bottom