1. The Rules have been updated regarding posting as a business on TGP. Thread with details here: Thread Here
    Dismiss Notice

THD Flexi 50 - Multi-meter question

Discussion in 'Amps/Cabs Tech Corner: Amplifier, Cab & Speakers' started by gearhosehead, Aug 5, 2006.

  1. gearhosehead

    gearhosehead Member

    Messages:
    29
    Joined:
    Jun 17, 2006
    I wonder if someone can point me in the right direction. I just bought a THD Flexi 50 and I'd like to bias the tubes. The whole procedure looks really simple...except that I'm multiimeter challenged. I have one, but the only thing I've ever used it for is to check the ohm ratings for pickups.

    Posted below is a picture of my multi-meter...can some kind techie tell me what to set it on :)

    [​IMG]

    Thanks!!!
     
  2. Dave C

    Dave C Gold Supporting Member

    Messages:
    1,360
    Joined:
    Jun 10, 2005
    Location:
    Waterford Ct
    Set your meter for DC Volts the 200mv setting should work for ya.
    Dave C
     
  3. gearhosehead

    gearhosehead Member

    Messages:
    29
    Joined:
    Jun 17, 2006
    Hi Dave, Just to show you how lost I am with this thing...is that the 200 (at 11 o'clock) right under "DC V" or the 200m at the bottom of that section at 9 o'clock position?

    Thanks!

    Nike
     
  4. Dave C

    Dave C Gold Supporting Member

    Messages:
    1,360
    Joined:
    Jun 10, 2005
    Location:
    Waterford Ct
    11:00 under DC V......actually the 200m lower on the scale closer to 9:00.
    Dave C
     
  5. gearhosehead

    gearhosehead Member

    Messages:
    29
    Joined:
    Jun 17, 2006
    Got it Dave, the 200m worked like a charm. The amp sounds GREAT now.

    Thanks!!!
     

Share This Page