• New Sponsor: ShipNerd, Ship Your Gear with Us... for less! Click Here.

The new 2021 Heritage Custom Core H150....Deep Thoughts

brentrocks

Guitar Hack/Player
Platinum Supporting Member
Messages
4,364
I was fortunate to find this 2021 Custom Core H150 used....I'm so glad i did. I have gone through this guitar inside and out...played it plugged and unplugged, and I'm going to give you my honest and complete review of this new model from the Heritage Custom Shop.


PRESENTATION...


I was impressed with Heritage's attempt to make this a "special" model. The case is VERY nice and heavy duty. The bound certificate is a nice touch as well. I also found the CS keychain a nice touch. A lot of these pleasantries, somewhat mirror the Gibson CS...like the sticker on the pick guard....but considering that this model is going head to head with the Gibson CS R9, I can see the reasoning.

IMG_7953 by brent HENDERSON, on Flickr
IMG_7954 by brent HENDERSON, on Flickr
IMG_7941 by brent HENDERSON, on Flickr




FIT AND FINISH...


I have to say this was the most surprising part of this guitar, to me. The finish on the guitar is like a lightly aged/overly polish swirled....I would call it a close comparison to the VOS finish on CS Les Pauls. Its gloss...but not completely gloss. It caught me off guard...I was expecting a super glossy, super shiny finish. Nicely aged binding...looks like smoky bar binding. All of the routes, holes, attached pieces and parts all fit right and look great. Neck joint and neck pitch are perfect. The bone nut is cut perfectly!

IMG_7936 by brent HENDERSON, on Flickr
IMG_7951 by brent HENDERSON, on Flickr
IMG_7945 by brent HENDERSON, on Flickr
IMG_7942 by brent HENDERSON, on Flickr









PARTS AND ELECTRONICS....

From what I'm seeing, it look like Heritage used all premium parts on these CC 150s. CTS pots, Orange drop caps, Switchcraft toggle and jack, Tonepros bridge, lightweight aluminum tailpiece and all vintage style braided wiring. I'm not sure what band the HERITAGE stamped tuners are...they seem to be ok, although, the D and G tuner nuts are striped out on my guitar (wont tighten down to the headstock) I'll have to email Heritage and see if they will send me a couple replacements.

IMG_7937 by brent HENDERSON, on Flickr
IMG_7938 by brent HENDERSON, on Flickr
IMG_7948 by brent HENDERSON, on Flickr
IMG_7946 by brent HENDERSON, on Flickr



THE WOODS...


Typical LP construction. One piece mahogany body and neck. Highly figured maple top. Rosewood fretboard with mother of pearl traps. The headstock has an inlaid veneer with the Heritage logo. I cant believe how light this guitar is!!!! Just under 8 1/2 lbs! Its lighter than my 2020 H150 Standard.

IMG_7944 by brent HENDERSON, on Flickr
IMG_7947 by brent HENDERSON, on Flickr
IMG_7952 by brent HENDERSON, on Flickr
IMG_7940 by brent HENDERSON, on Flickr







NECK CARVE....


Heritage really nailed the necks on these! Its a rounded C shape which measures .895 at the first fret and .982 at the 12th fret with a moderate amount of shoulder. Not baseball bat-ish. I find it very comfortable...its very similar to the neck on my 2017 Heritage 535 custom.





SETUP AND PLAYABILITY...


This H150 is PLEKed...all new Heritages are now. So, I was expecting a low action with minimal neck relief. Well, I got it!!! I use 10-46 gauge strings. The Custom Core 150 sets up with a super low action which makes it play like butter all the way up the neck!! Almost effortless chording and wonderful sustain.





TONE....


Heritage is putting their own 225 Parson Street Pickups in these Custom Core models. I'm not sure who winds these...I'm guessing someone in the Kalamazoo local? The 225 pickups remind me of a cross between a CS Duncan 59 and Seth Lover. The Bridge pickup tone is crisp and articulate. Great note definition. Not ice-picky. The neck pickups tone is very warm and creamy. Also very articulate. Very fat when pushed with some moderate OD. Overall, I feel the tone of this guitar is right up there with some of the best Les Pauls I have owned. I'm probably gonna try some different pickups in it, just because, thats what i do...lol. But out of the box....The Custom Core H150 sounds fantastic!

IMG_7939 by brent HENDERSON, on Flickr








PUTTING A BOW ON IT....


I can honestly say I'm very impressed with what Heritage has done with the Custom Core H150. Heritage has shown, with this model that they can play with the big boys. I'm not out to start a HERITAGE VS GIBSON DEBATE....NO!!! Its all personal preference. You want a CS Gibby, buy a Gibby. You want a Kalamazoo made CS LP...buy the Heritage....its that simple!!! I honestly think the Custom Core H150 and the Gibby Custom Shop R9 are of equaly quality and playability. (i know im gonna catch a lot of flack for that statement) The street price on the Custom Core H150 (non artisan aged) is $3799. Artisan Aged $4299. If you are looking for a top shelf Les Paul, made in Kalamazoo, Michigan....the Heritage Custom Core H150 is your guitar!!!
 

RRfireblade

Member
Messages
4,125
Pretty guitar. Headstock inlays look a little out of place, and I'm not sure I would invest that much money in one of those. But it sure is a looker.
 

brentrocks

Guitar Hack/Player
Platinum Supporting Member
Messages
4,364
Made a few small mods to it last night. The Heritage tuners were crap and did not tighten down to the headstock very well. (2 of the 6 were stripped out) I’m a fan of locking tuners anyway.

The 225 pickups were good, but I had a set of double cream THROBAK ER customs that I thought would be a good match for this guitar…I was right, they sound FABULOUS!!!

Also, I went with a traditional pick guard, poker chip and truss rod cover.

…and a HRW switch tip as a little tip of the hat to the “good ol days” of Heritage.

 

brentrocks

Guitar Hack/Player
Platinum Supporting Member
Messages
4,364
So..... how long before this one is in the Emporium for sale? :p
Congrats on another cool guitar Brent!
Killer looking guitar for sure!
Pretty guitar. Headstock inlays look a little out of place, and I'm not sure I would invest that much money in one of those. But it sure is a looker.
Sweet, but looks weird not to see the “The” on the headstock. ;)
Great Review, Brent !

The instruments coming out of Kalamazoo are extraordinary !!
Thanks Fellas!!!
 

mapleleaf14

Member
Messages
216
Great looking guitar!

I've been slowly checking these out every now and then, and I've yet to find one that would be acceptable to me as far as the weight goes...the 3 or 4 that I've come into contact with have all been 9 lbs. or so.

It took me a long time to find my sunburst artisan aged H-535, but I finally found one that was only 7 lbs. 2 oz. which is still the lightest one I've come across, and I had been looking for a natural finish one but "settled" for the one I got after playing it and realizing not only was it on the lighter side, but was a killer player as well. I know that I'll eventually find an H-150 that's nice and light and with my luck, at that particular moment in time I probably won't have the money for it!!
 

Nebakanezer

World’s Okayest Guitar Player
Gold Supporting Member
Messages
4,259
Made a few small mods to it last night. The Heritage tuners were crap and did not tighten down to the headstock very well. (2 of the 6 were stripped out) I’m a fan of locking tuners anyway.

The 225 pickups were good, but I had a set of double cream THROBAK ER customs that I thought would be a good match for this guitar…I was right, they sound FABULOUS!!!

Also, I went with a traditional pick guard, poker chip and truss rod cover.

…and a HRW switch tip as a little tip of the hat to the “good ol days” of Heritage.

Was gonna ask about a family photo, but my ability to be patient and keep scrolling pays off!?!?!?! Awesome stable!!!! I take it the truss Rod screw holes are the same distance apart as Gibsons?
Just a small sidetrack…..
Tell me about that Heritage head, if you would please?!?!
 

brentrocks

Guitar Hack/Player
Platinum Supporting Member
Messages
4,364
Was gonna ask about a family photo, but my ability to be patient and keep scrolling pays off!?!?!?! Awesome stable!!!! I take it the truss Rod screw holes are the same distance apart as Gibsons?
Just a small sidetrack…..
Tell me about that Heritage head, if you would please?!?!
Thanks bro!! The truss rod cover holes are slightly different. But all holes get covered with either cover.

The heritage colonial head is a 2 channel/2 voiced 50 watt beast. Tons of clean headroom. Loud as f@@@!!! Takes pedals very well.
 

Lkdog

Gold Supporting Member
Messages
442
Very nice!
I have had a couple H535s and an H555 that were as good as any ES 335s I have had, including CS models.
Just picked up another H535 from a TGP member, must have been one of last ones before the sale, and it is also very impressive overall.

Your 150 looks great.
 




Top Bottom