Discussion in 'Amps and Cabs' started by teanett, Feb 27, 2009.
to have a 2x12 16 ohm cab is to run two 8 ohm speakers in series, right?
cool. now i have a reason to buy new speakers.
i love it, there is always a reason to buy new gear
Actually... Weber Speakers offer 32 ohm versions, so you could parallel two 32-ohm 12" to get your 16-ohm cab, if you want. Now what are you going to do?
If you use 8 ohm speakers, then wire them to two seperate jacks, you can use a series wired wye cable, for 16 ohms, using both speakers, or use the speakers seperatly for stereo, at 8 ohms each, (a seperate cable from each jack, to seperate amps).
Can also use a paralell wired wye cable, for a 4 ohm load.
You can make-up a pair of short wye cables quite easily, just remember which is which.
don't know exactly, but i'll spend some money!!!:BEER
so what should i get?
What's your amp, and what sound characteristics do you want to enhance?