Tuner placing problem

mic yim

Member
Messages
4
Hi
recently I was planning add a Mesa high wire buffer on my pedalboard.
There's the problem, where is the best placement for tuner ?
There are some option placement...

1. Using the tuner out form Switcher system? since I've using Musicom lab 62M,

2. Using the Tuner out form Mesa high wire buffer?

3. Or other suggestions?

My signal chain:
Guitar > Musicom lab 62m in >
loop1. CKK Overdrive
loop2. JHS distortion
loop3. RC booster
loop4. MXR chorus >
Volume pedal >
loop5. Keeley Delay anc reverb carven >
neunaber wet stereo reverb >
Musicom lab 62m out >
Amp
 

Black_Label

Member
Messages
4,529
Hi
recently I was planning add a Mesa high wire buffer on my pedalboard.
There's the problem, where is the best placement for tuner ?
There are some option placement...

1. Using the tuner out form Switcher system? since I've using Musicom lab 62M,

2. Using the Tuner out form Mesa high wire buffer?

3. Or other suggestions?

My signal chain:
Guitar > Musicom lab 62m in >
loop1. CKK Overdrive
loop2. JHS distortion
loop3. RC booster
loop4. MXR chorus >
Volume pedal >
loop5. Keeley Delay anc reverb carven >
neunaber wet stereo reverb >
Musicom lab 62m out >
Amp
Welcome to TGP.

I agree with the above. Just run a cable from the 'tuner out' jack on the Musicomlab to the input of your tuner. If you don't want to do that for some reason, I'd place the tuner first, right before the Musicomlab. Good luck!
 

Classic09

Member
Messages
2,463
If the Musicomlab has a tuner out, I'd use that. I also wouldn't let a buffer cause any concern where a tuner would go as it doesn't impact in the same way as it might a Fuzz or wah.
 




Trending Topics

Top