vht 2502 tech help. Please.

Discussion in 'Amps and Cabs' started by needtopractice, Jan 14, 2015.

  1. needtopractice

    needtopractice Member

    Messages:
    14
    Joined:
    Feb 18, 2009
    Hey guys. I have a vht 2502 that won't make any sound when taken out of standby. Cables are good. The A channel had been acting weird for a while so I've just been using Ch B. Now B is gone too. The fuses, main and the front fast blows, all seen ok. Yesterday when playing through Ch B i noticed that my toddler son had taken ch A out of standby with no load. He loves all buttons and switches. It'd been a couple minutes before i noticed and threw it in standby. That's everything i can think of. Any thoughts ?
     
  2. support

    support Member

    Messages:
    540
    Joined:
    Dec 10, 2008
    Location:
    North Hollywood, CA
    Front panel fuses can look good and be bad. Best way to test is with a continuity checker or ohm meter. Otherwise get new 1/2A slo-blo fuses and try again.

    A bad power tube will blow a front panel fuse. You may be due for a set of tubes.
     
  3. Kelly

    Kelly Member

    Messages:
    2,676
    Joined:
    Jan 6, 2008
    Location:
    NC
    Test it with another cab, too.
     
  4. needtopractice

    needtopractice Member

    Messages:
    14
    Joined:
    Feb 18, 2009
    good info gents. appreciated.
     

Share This Page