Voodoo Labs PP2 How to....

Discussion in 'Effects, Pedals, Strings & Things' started by Mantis, Feb 15, 2008.


  1. Mantis

    Mantis Member

    Messages:
    41
    Joined:
    Dec 11, 2007
    I have a DLS Ultra Chorus that uses a positive center pin adapter.

    How can I power it with the PP2?


    These are the specs off the DLS website:
    Power: "+9vdc" Input for 9 to 13.8vdc, 130ma minimum, 2.1mm jack (DC adapter included)
    *Our internal circuit will accommodate any polarity
    of input jack.
     
  2. stuey222

    stuey222 Member

    Messages:
    65
    Joined:
    Feb 1, 2008
    Location:
    Nashville
    For a positive ground on the PP2, you just need the positive ground cable.
     
  3. dc_jcm800

    dc_jcm800 Member

    Messages:
    2,070
    Joined:
    Oct 4, 2006
    Location:
    Massachusetts
    You can contact Voodoo labs. They have many cable options including reverse polarity and dual for 18v.
     
  4. gtrguy17

    gtrguy17 Member

    Messages:
    240
    Joined:
    Oct 4, 2005
    Location:
    Chicago. Not the burbs. Chicago.
  5. Mantis

    Mantis Member

    Messages:
    41
    Joined:
    Dec 11, 2007
    Thats what they say......I'm no electronics whiz, so I want to be sure..

    The PP2 spurts a maximum of 100 ma, where as the Ultra Chorus needs a minimum of 130 ma...... Is this something to be concerned about?
     
  6. CryBaby

    CryBaby Member

    Messages:
    135
    Joined:
    Nov 17, 2005
    Location:
    Gothenburg Sweden
  7. KBN

    KBN Member

    Messages:
    825
    Joined:
    Mar 17, 2006
    You are going to need a PP2 Plus. The Plus has a few outputs that do 200mA.
     

Share This Page