What are the measurements for 1960B back board

Discussion in 'Amps and Cabs' started by Kitarist, Jun 13, 2008.

  1. Kitarist

    Kitarist Member

    Messages:
    1,772
    Joined:
    Oct 31, 2007
    I'm gonna replace the MDF board with a birch plywood board so i need measurements (centimeters) does anyone have them

    Thanks
     
  2. Kitarist

    Kitarist Member

    Messages:
    1,772
    Joined:
    Oct 31, 2007
  3. Kitarist

    Kitarist Member

    Messages:
    1,772
    Joined:
    Oct 31, 2007
  4. ScottR

    ScottR Silver Supporting Member

    Messages:
    2,103
    Joined:
    Dec 30, 2005
    Location:
    Mrlnd
    couldn't you just measure yours?
     
  5. Kitarist

    Kitarist Member

    Messages:
    1,772
    Joined:
    Oct 31, 2007
    its not here atm hehe so can someone post the specs :D :D
     
  6. SatelliteAmps

    SatelliteAmps Member

    Messages:
    6,185
    Joined:
    Oct 19, 2007
    Location:
    Normal Heights, Calif
    It's pretty precise. Best to measure directly off your old one. If you absolutely can't, you can try to rough guess it. The cab's measure 760 x 830 x 360 mm, which translates to 29.92 x 32.68 x 14.17 inches. If you make a rough guess on the outside edge of the rear of the cabinet at .75 x 2 (top and bottom, left and right) that means to remove 1.5 inches from those dimensions. Rough guess becomes 28.42 x 31.18. That is a very precise, but also rough guess without having the back right in front of you, and does not take into account tolex.
     

Share This Page