• The Gear Page Apparel & Merch Shop is Open!

    Based on member demand, The Gear Page is pleased to announce that our Apparel Merch Shop is now open. The shop’s link is in the blue Navigation bar (on the right side), “Shop,” with t-shirts, hats, neck buffs, and stickers to start. Here’s the direct link: www.thegearpageshop.com

    You’ll find exclusive high-quality apparel and merchandise; all items are ethical, sustainably produced, and we will be continuously sourcing and adding new choices. 

    We can ship internationally. All shipping is at cost.


What kind of strat is this saddle for?

sidehatch

Member
Messages
1,207


Left is mexican strat, Middle is Allparts 2 7/32nd US strat, Right is an Allparts "vintage strat" saddle?

I've been trying to figure out this so Im making a thread.

The middle is definitely US spacing because I just replaced them with the US detemple/kts set.

The deal is the saddle set on the right is too large for my real 59 strat and my self assembled warmoth chambered strat with callaham US block.
 

bluesjunior

Member
Messages
5,921
If I remember correctly when I built my partscaster with vintage string width each saddle should be 10.8mm wide.
 

RvChevron

Member
Messages
2,465
Get a caliber and measure them all.

Correct vintage saddle width should be or real close to 11.3mm to form a 2-7/32 string spread e to E.

Mexican ones should have a width of 10.5mm to form a 2-1/16" string spread.

Then there is the 10.8mm ones to form the 2-1/8" string spread.
 




Trending Topics

Top