What Voodoo Lab power cable do I need for the timefactor?

[Drew_swiss]

Voodoo Lab has several options but doesn"t specify eventides.

 

[phillygtr]

From the Voodoo Lab Pedal Power 2 manual:

Eventide Pedals
You can power an Eventide Stompbox, like TimeFactor or
PitchFactor, using a special “current doubling” cable. This is a
parallel Y-cable used to combine both outputs 5 and 6 to double the
available current. Set switches 5 and 6 both away from NORMAL
and use a current doubler adapter (not included) with the red
5.5 x 2.5mm barrel cable.

http://www.voodoolab.com/manuals/pedal_power_2plus_manual.pdf

So you'll need the one in the middle (with the green):

http://www.voodoolab.com/shop/index.php?cPath=22_24_33

 

[jnepo1]

You can use their reverse polarity 2.5mm cable. Make sure it's the 2.5mm barrel which is always positive center(reverse polarity). If you have the ISO-5 or the Digital or 4x4, just use the high mA tap to power the Eventide. The PP2+ will require the current doubler adapter with the reverse polarity 2.5mm cable as well.