Zoom G3 with EB Volume Pedal: How to Connect??

Discussion in 'Digital & Modeling Gear' started by rdamato, Feb 22, 2012.

  1. rdamato

    rdamato Supporting Member

    Messages:
    1,006
    Joined:
    Dec 10, 2006
    Location:
    Ramsey, NJ
    Anyone know how to integrate an EB Volume pedal into a Zoom G3?

    Thanks,
    Ron
     
  2. birdie_in_texas

    birdie_in_texas I can haz virgins? Silver Supporting Member

    Messages:
    1,641
    Joined:
    Sep 12, 2009
    Location:
    TEXAS, bitches..!
    yep..plug it into the port marked "Controller" then in whatever patch you are using, change it to an expression pedal or a volume pedal..
     
  3. fly135

    fly135 Member

    Messages:
    799
    Joined:
    Nov 27, 2007
    Location:
    Orlando
    You need a stereo TRS to split mono TS cable. The stereo end goes into the G3 and the mono ends go into the input/output of the EB. Tip on the output, and ring on the input.

    If you are using a 25K EB you're probably OK. Not sure how the 250K will work. The $30 M-Audio EX-P works fine.
     

Share This Page